StorageCraft Recovery Environment 5.2.6 (WinPE 10) x64
StorageCraft Recovery Environment 5.2.6 (WinPE 10) x64
StorageCraft Recovery Environment is a tool that allows you to restore your system from a backup image created by StorageCraft ShadowProtect, a backup and disaster recovery software. The recovery environment is based on Windows Preinstallation Environment (WinPE), a lightweight version of Windows that can run from a CD or USB drive without installing on the hard disk.
The latest version of StorageCraft Recovery Environment is 5.2.6, which is built on WinPE 10 x64, the same platform as Windows 10. This version supports restoring systems with EFI enabled UEFI firmware and GPT disk layout, which are common in newer machines. It also supports restoring systems with BIOS firmware and MBR disk layout, which are common in older machines.
DOWNLOAD: https://urlgoal.com/2w3Nrb
How to create a bootable CD or USB drive with StorageCraft Recovery Environment 5.2.6 (WinPE 10) x64
To create a bootable CD or USB drive with StorageCraft Recovery Environment 5.2.6 (WinPE 10) x64, you need to use the StorageCraft Recovery Environment Builder, which is a simple wizard that guides you through the process. You will need the following requirements:
A Windows 7 or newer operating system
A StorageCraft ShadowProtect product key
A Windows ADK 10 (build 1607) installation, which includes the Deployment Tools and Windows Pre-installation Environment components
A blank CD or USB drive with at least 1 GB of space
The steps to create the bootable media are as follows:
Download the StorageCraft Recovery Environment Builder executable from [www.Storagecraft.com/iso]. Enter your ShadowProtect product key, accept the terms and conditions, and click Next.
Run the executable as administrator and follow the installation wizard.
Launch the Recovery Environment Builder from the Start menu or the desktop shortcut.
Select the Output Product Type as StorageCraft Recovery Environment for Windows.
Select the Output Media Type as CD/DVD or USB Flash Drive, depending on your preference.
Select the Output Media Drive as the drive letter of your blank CD or USB drive.
Click Build to start creating the bootable media.
Wait for the process to complete, which may take several minutes.
Eject the bootable media and label it accordingly.
How to use StorageCraft Recovery Environment 5.2.6 (WinPE 10) x64 to restore your system
To use StorageCraft Recovery Environment 5.2.6 (WinPE 10) x64 to restore your system, you need to boot your machine from the bootable media that you created in the previous section. You will need the following requirements:
A machine that supports EFI/UEFI boot or BIOS boot, depending on your system configuration
A backup image of your system created by StorageCraft ShadowProtect
A backup repository that contains your backup image, such as a network share, an external hard drive, or a cloud storage service
A target disk that has enough space to accommodate your backup image, and is either uninitialized or has no important data on it
The steps to restore your system are as follows:
Insert the bootable media into your machine and power it on.
Press any key to enter the recovery environment when prompted.
Check the Info section at the bottom left of the recovery environment window to ensure that you have a network connection and a valid IP address assigned via DHCP.
Select the Disk tab to ensure that your target disk is recognized as a valid destination. If not, use the Load Drivers option under Tools to load the appropriate drivers for your disk controller.
Select the Backup tab and click Connect to Repository to access your backup repository. Enter the required credentials and browse to the folder that contains your backup image.
Select the Restore tab and click Restore Wizard to start the restore process.
Select the backup image that you want to restore and click Next.
Select the target disk that you want to restore to and click Next. If the target disk is uninitialized, you will be prompted to initialize it as GPT or MBR, depending on your system firmware. If the target disk is already partitioned, you will be prompted to overwrite it or resize it.
Review the summary of the restore operation and click Finish to start restoring your system.
Wait for the restore process to complete, which may take several minutes or hours, depending on the size of your backup image.
Click Close when the restore is done and eject the bootable media.
Reboot your machine and enjoy your restored system.
For more information on how to use StorageCraft Recovery Environment 5.2.6 (WinPE 10) x64, please refer to the [official documentation].